Free shipping over €49 in BE, NL, LU, DE & FR · printed to order near Bruges
Photo Series No. 1 · 22 panels

Unique photos and artwork, printed on the front of your Steam Machine.

Swappable front panels for the 2026 Steam Machine, printed to order near Bruges. The first Photo Series is 22 photographs by Eva of Flowz.Studio: landscapes, animals and close-up work, each printed to the edge of the panel. One run per photograph.

Browse the series · from €25,00 How it mounts
Roskambrug faceplate mounted on a Steam Machine 51.267° N, 3.217° E
Roskambrug · €25,00 Photograph by Eva, Flowz.Studio
Panel
156 × 126 mm
Thickness
8,7 mm
Mount
4 magnets
Dispatch
48 hours
Roskambrug panel, seen from the side on the machine 51.267° N, 3.217° E
The story behind No. 1

Roskambrug

Looking along the curve of the A11 viaduct towards the white steel of the Roskam bridge over the Boudewijnkanaal. The viaduct runs parallel to rail line 51B here, which is why the shot has two lines pulling your eye to the same point.

Photograph by Eva, Flowz.Studio, at A11 viaduct, Dudzele.

€25,00 See the panel

One run per photograph. When a run sells out, that landscape does not come back.

New and popular

printed to order, dispatched in 48 h

Start with a series

See everything →
Photo Series Photographs by Eva of Flowz.Studio, printed to the edge of the panel. One run per photograph. 22 panels
Graphical Series Designs drawn for the panel rather than photographed. Type, colour and pattern, printed to the edge. 1 panel
The workshop

Printed to order near Bruges, checked on a real machine

Every panel is sliced, printed and deburred here in Zedelgem, near Bruges, then checked on the Steam Machine we keep on the bench. Fit, flatness, magnet height and airflow.

How we make them
2print passes per panel
156 × 126 mmprint area, edge to edge
4checks before it ships
120 mmintake, left clear

From the journal

All posts →
18-07-2026 · 4 min read

Why the front panel comes off at all

Valve could have glued it shut. Instead there are magnets and a published set of drawings.

Read → 04-07-2026 · 3 min read

Printing wood-fill in a warm workshop

Wood-fill filament behaves differently at 31 °C, which is why your walnut panel might be a shade darker than the photo.

Read → 20-06-2026 · 3 min read

The four things we measure before a panel ships

Fit, flatness, magnet height and airflow. Dull work, and the reason a panel stops rattling.

Read →
Custom artwork · in development

A panel that matches your room

Upload a photo, a print or a pattern. It prints to the edge of the panel, 156 × 126 mm. Leave your email address and we will tell you when the editor opens.

YOUR ARTWORK
156 × 126 mm